Knox Makers – Classroom
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
LockPicking Intro – Hacking a Lock
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis Is the Authorization class for the Lockpicks and locksport.
We will go over safety and proper use of lockpicking tools and the ethics behind locksport.
“Locksport is the sport or recreation of defeating locking systems. Its enthusiasts learn a variety of skills including lock picking, lock bumping, and a variety of other skills traditionally known only to locksmiths and other security professionals. Locksport followers enjoy the challenge and excitement of learning to defeat all forms of locks, and often gather together in sport groups to share knowledge, exchange ideas, and participate in a variety of recreational activities and contests.”
Upon completion of this course the Student will understand; the physical mechanics of Hacking a pin tumbler lock, the ethics behind lockpicking, and will successfully pick a five pin lock.
There is a maximum of 10 participants. Cost of this event is $24.96 members and 34.96 non members. Includes; Class, 2 Picks, and a Tension Wrench.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Hand Cut Dovetails
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Inkscape 201: Inkscape for the Laser
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is the primary vector graphics editor used at Knox Makers. In this secondary class, some useful extensions and processes common to the laser will be taught, including:
- hatch fill extension
- engraving raster images
- node editing and tracing
- figuring out slots and tabs
Computers will be provided and a basic knowledge of Inkscape is expected of participants. If you wish to bring your own laptop, please download Inkscape at inkscape.org and come a few minutes early to make sure it is set up properly.
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
Inkscape 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is a free and open sourced vector graphics editor. It is the primary software used to interface with Knox Makers’ laser cutter, CNC router, and vinyl cutters. This class will teach basics of drawing and arranging shapes, talk about vectors and paths, and give a general overview of Inkscape and its capabilities.
Computers will be provided, but if you want to use your own, you can download Inkscape at inkscape.org
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
Making a beer can stove
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesMaking a beer can stove. Ultralight backpacking stove that burns alcohol. Any aluminum beverage can will work. You need to have 3 empty cans to make one. There is a maximum of 8 participants. The cost for the class is $14.96 for Knox Maker Members and $19.96 for Non-Members. Directions- Knox Makers parking and entrance…
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Making Etched Metal Drinkware
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIt is that time of year again. People are trying to get a gift for someone who is hard to shop for. Why not make them something instead? You could also just make something for yourself. This class will guide attendees through the process of creating vinyl graphics that are then applied to stainless steel…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Acrylic Holiday Ornaments
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesCome make stained glass style acrylic holiday ornaments!
Tracy will have all the supplies and instructions for you to make a colorful ornament for your tree or window, and also teach you the techniques to make your own.
Choose from 4 different per-designed styles, or, if you already know how to design for the laser, talk with Tracy about how to have your own custom ornament made.
No laser or any other experience necessary.
The cost is $24.96 for Knox Makers members, $29.96 for General Public.
Toy Tech Adaptation Night
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesSpark and Knox Makers will be adapting toys for Toy Tech 2021. Toys that are not necessarily functional for children with disabilities will be switch-adapted for use by children of all ability levels. Participants in this workshop can bring their own toy(s) to adapt or adapt toys donated to Spark. Supplies and tools will be provided, but feel free to bring your own! No experience required!
Please RSVP if you plan to attend this event. We would appreciate it very much.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Anatomy of a Lock And Key
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis Is the Authorization class for the “Lock Pin/LockSmith Station”. Station is (will be) located in the machine area and is equipped with Pinning Kits and Key Duplicator.
We will go over; safety, proper use of a key duplicator, the parts of a lock and key. In addition we will also Explore the engineering behind the modern pin tumbler lock, and rekey a 5-pin & 6-pin “Schlage” lock cylinder. This is the class for; challenge lock pinning, rekey of household locks to match the same key, general overview on how locks work and why, basic locksmith intro.
“The pin tumbler lock is a lock mechanism that uses pins of varying lengths to prevent the lock from opening without the correct key. Pin tumblers are most commonly employed in cylinder locks, but may also be found in tubular pin tumbler locks.”
Upon Completion of this Course the Student will have the knowledge to properly identify and understand the relationship between a lock and its key, Further, they will have an introduction on how to rekey pin tumbler locks.
LockPicking Intro – Hacking a Lock
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis Is the Authorization class for the Lockpicks and locksport.
We will go over safety and proper use of lockpicking tools and the ethics behind locksport.
“Locksport is the sport or recreation of defeating locking systems. Its enthusiasts learn a variety of skills including lock picking, lock bumping, and a variety of other skills traditionally known only to locksmiths and other security professionals. Locksport followers enjoy the challenge and excitement of learning to defeat all forms of locks, and often gather together in sport groups to share knowledge, exchange ideas, and participate in a variety of recreational activities and contests.”
Upon completion of this course the Student will understand; the physical mechanics of Hacking a pin tumbler lock, the ethics behind lockpicking, and will successfully pick a five pin lock.
There is a maximum of 10 participants. Cost of this event is $24.96 members and 34.96 non members. Includes; Class, 2 Picks, and a Tension Wrench.