Knox Makers – Classroom
Laser Cutting Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
Inkscape 201: Inkscape for the Laser
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is the primary vector graphics editor used at Knox Makers. In this secondary class, some useful extensions and processes common to the laser will be taught, including:
- hatch fill extension
- engraving raster images
- node editing and tracing
- figuring out slots and tabs
Computers will be provided and a basic knowledge of Inkscape is expected of participants. If you wish to bring your own laptop, please download Inkscape at inkscape.org and come a few minutes early to make sure it is set up properly.
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
Inkscape 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is a free and open sourced vector graphics editor. It is the primary software used to interface with Knox Makers’ laser cutter, CNC router, and vinyl cutters. This class will teach basics of drawing and arranging shapes, talk about vectors and paths, and give a general overview of Inkscape and its capabilities.
Computers will be provided, but if you want to use your own, you can download Inkscape at inkscape.org
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
CRBG Revival Meeting
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHowdy folks, I'm Andrew Messersmith. I was a member of CRBG from 2012-2019 and President for 2016-2018. I was saddened to hear that CRBG was struggling to find its feet after the Covid years took its toll. I spoke with Honey Bun and we've decided to try and have an Ol' fashioned Revival. This coming Sunday, June 26th at 1:30pm I'd like to invite past, present, and aspiring members to Knox Makers forge at 116 Childress St. in South Knoxville.
The Guild has a lot of work to do to get back inline with the charter, but before we do that we need to rally the troops, find folks interested in being involved and engaged, and just get together, have some fun, and swing a hammer.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
Intro to SMAW (aka Stick Welding)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class, we will cover the basics of SMAW (AKA Stick Welding) with E7018 and E6010/E6011 (depending on availability) electrodes.
THIS CLASS WILL BE HELD OUTSIDE AND WILL BE SUBJECT TO THE WEATHER. AN ANNOUNCEMENT WILL BE MADE 48HRS PRIOR TO THE CLASS IF A CANCELLATION IS NECESSARY.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but a class to cover how to stick weld, particularly with the welders we have available at Knox Makers.
We will spend a few minutes refreshing basic safety and area requirements, then we will get right to the welding!
Students are welcome to bring their own PPE, shield, and gloves if they have them, but this is NOT required- we have setups available to use
The cost is $24.96 for Knox Makers members, $74.96 for General Public
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Scrap Metal Art
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesLearn to make metal sculptures from recycled metal scrap!
No experience necessary- just use your imagination.
We will begin by covering shop safety and go over some tool basics. After a bit of discussion about scrap materials the class will design and create their own small sculptures to take home.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Intro to O’scopes, 11:30am (Sold Out)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe oscilloscope is one of the most powerful (and fun) tools for troubleshooting and observing circuit behaviors. If you've wanted to look beyond DC voltages on a multimeter, which only shows a small portion of what' going on, this is your opportunity! In this class, each attendee will have a modern or semi-modern oscilloscope to…
Intro to O’scopes, 10am (Sold Out)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe oscilloscope is one of the most powerful (and fun) tools for troubleshooting and observing circuit behaviors. If you've wanted to look beyond DC voltages on a multimeter, which only shows a small portion of what' going on, this is your opportunity! In this class, each attendee will have a modern or semi-modern oscilloscope to…