Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
1 event,
Mortise and Tenon Joinery
Mortise and Tenon Joinery
Fitting a square hole and corresponding square peg together is a convenient mechanical joint for a variety of assemblies. In this class I will demonstrate a variety of techniques which can be used to accomplish this task and create well-fitting and functional mortise and tenon joinery. Topics covered will include; anatomy of the joint, rationale…
0 events,
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
0 events,
0 events,
0 events,
1 event,
1 event,
Intro to Metalworking
Intro to Metalworking
This is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
0 events,
2 events,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
New Members Onboarding
New Members Onboarding
Whether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
1 event,
Embroidery Machine Auth
Embroidery Machine Auth
This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art. For…
1 event,
Woodworking 101
Woodworking 101
This class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context…
0 events,
2 events,
Using, Choosing and Abusing Transistors
Using, Choosing and Abusing Transistors
Electronics enthusiasts use transistors as switches and amplifiers in a wide range of applications. While they are relatively simple devices they are often a source of confusion and frustration when we are called upon to use them. NPN? PNP? MOSFET? JFET? Which of the 10,000 in the catalog is the right choice? In this class…
Laser Cutting Authorization
Laser Cutting Authorization
This is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…
2 events,
Creating Wood Inlays
Creating Wood Inlays
Brian will be demonstrating the technique he use for making wood inlays. In this class you will practice this technique and create an inlay of a leaf on a piece of ash stock. You will be using marking knives, routers, gouges, chisels and the bandsaw. All materials and tools will be provided, however if you have your own marking knife or gouges you would prefer to use I encourage you bring them.
Embroidery Machine Auth
Embroidery Machine Auth
This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art. For…
0 events,
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
1 event,
Embroidery Machine Auth
Embroidery Machine Auth
This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art. For…
1 event,
Machining 100 – Intro To Machining
Machining 100 – Intro To Machining
Billy will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
1 event,
Let’s Learn to Draw!
Let’s Learn to Draw!
Have you always wanted to learn to draw but have been afraid that you’ll never get beyond stick figures? Do you believe you're just not creative enough to draw? Do you know how to draw a little bit, but would like to get better? This class is for you. As a working artist I have been drawing for well over a decade and I know that drawing is not something you are born with, it’s a skill you can learn. I can show you easy ways to get started like meditative exercises or following simple shapes and shading. Whatever suits your speed. You’ll learn what to look for in tools, papers, and possible directions you can take your drawing practice once class is over. So come and enjoy a nice evening with wine (if you’re old enough) and start building your drawing skills.
3 events,
Intro to Metalworking (MIG 101)
Intro to Metalworking (MIG 101)
This is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them. but these are NOT required as we have setups for everyone to use.
Please do NOT bring your own welding machines to use, the setup and testing time could impact other students.
Milling 101 – Bridgeport Mill Tool Authorization
Milling 101 – Bridgeport Mill Tool Authorization
** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
This is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Stitch n Bitch
Stitch n Bitch
Come and hang out in Fiber Arts. Just bring a project to work on, hang out and have fun! Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Knox Makers is a place for the Knoxville area’s engineers, artists, hobbyists, innovators, educators and entrepreneurs…
2 events,
Blacksmithing: Whack n’ Yack
Blacksmithing: Whack n’ Yack
Join us in the forge for an opportunity to work and learn with other smiths at Knox Makers. This loosely structured event will include a short demonstration of a technique by Andrew, followed by open forge time. Folks are invited to work together, ask questions, and learn from one another. Bring past and current projects…
Virtual Board Meeting
Virtual Board Meeting
Knox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
0 events,
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
3 events,
Intro to Metalworking (MIG 101)
Intro to Metalworking (MIG 101)
This is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them. but these are NOT required as we have setups for everyone to use.
Please do NOT bring your own welding machines to use, the setup and testing time could impact other students.
Embroidery Machine Auth
Embroidery Machine Auth
This is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art. For…
Build a Custom Macro Keyboard
Build a Custom Macro Keyboard
A macro keyboard is a custom keyboard with keys, knobs or buttons, which plugs into your USB port and can be programmed to perform a variety of tasks (or macros). If you've ever wanted to build your own custom macro keyboard, this is your chance! Here are a couple of examples: - A fairly advanced…
1 event,
New Members Onboarding
New Members Onboarding
Whether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
1 event,
Slow Jams in the Wood Shop
Slow Jams in the Wood Shop
Ever wonder what your Czar is listening to when he's got his ear buds in? Come tonight and find out. Work on your project while we listen to a mix of Celtic, 90's country, 90's alternative, OG R&B, indie and Broadway show tunes. Brian will be available to answer your burning wood questions. Directions- …
2 events,
Amigurumi Basics
Amigurumi Basics
Amigurumi is the art of knitting and crocheting small stuffed creatures. In this class, you'll learn the basics of crochet amigurumi by making a jellyfish. Learn how to make a magic loop, crochet in the round, increase and decrease, and join pieces together. Beginners are welcome, even if this is your first crochet project!
The cost is $9.96 for Knox Makers members, $19.96 for General Public. There will be a maximum of 6 spots for this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class will be canceled and all tickets will be refunded.
1 event,
Make a Sawblade Clock
Make a Sawblade Clock
Make your own Sawblade Clock to take home with you.
All materials and tools are provided, just bring a creative attitude!
We will be upcycling our worn out KM sawblades into awesome wall clocks. You will keep the clock and all ticket sale proceeds will go towards purchasing new sawblades for our shop... its a win - win!
The cost is $24.96 for Knox Makers members, $49.96 for General Public. There will be a maximum of 10 spots for this class.
1 event,
Woodworking 101
Woodworking 101
This class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context…
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
1 event,
1 event,
Blacksmithing Authorization – Intro to Forging
Blacksmithing Authorization – Intro to Forging
This class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building. Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is…
1 event,
Power Hammer Authorization – LG25 “Thumper”
Power Hammer Authorization – LG25 “Thumper”
This class introduces you to the latest addition to the blacksmith shop, Thumper, Our 25lb Little Giant PowerHammer! This class will cover operational maintenance, necessary lubrication points, how to swap out dies, things to watch out for on this nearly 80 year old machine, and plenty of forging time to get comfortable with its capabilities.…
2 events,
Make a Mallet/Thor Hammer
Make a Mallet/Thor Hammer
In this class we each student will, start to finish, make a joinery mallet. A wedged mortise and tenon will be used to fix the head to the handle and made using table saw jigs, advanced layout tools and techniques, hand saws (crosscut back saw), router plane, hand planes, chisels and possibly a few extras. A joinery mallet is an essential addition to any tool chest. If you don't have a tool chest then just look rad about town toting your bespoke Thor hammer. All tools and materials will be provided. No woodworking experience necessary.
The cost is $39.96 for Knox Makers members, $59.96 for General Public
![mortise-and-tenon](https://knoxmakers.org/wp-content/uploads/2022/09/mortise-and-tenon-e1662474828840.jpg)
![Welding 101](https://knoxmakers.org/wp-content/uploads/2019/01/welding-e1641930678705.jpg)
![embrodeiery auth](https://knoxmakers.org/wp-content/uploads/2023/02/embrodeiery-auth-scaled-e1690159639490.jpg)
![Woodworking101](https://knoxmakers.org/wp-content/uploads/2021/06/Woodworking101-scaled-e1659251568660.jpg)
![embrodeiery auth](https://knoxmakers.org/wp-content/uploads/2023/02/embrodeiery-auth-scaled-e1690159639490.jpg)
![Milling](https://knoxmakers.org/wp-content/uploads/2019/02/milling.jpg)
![learn-to-draw](https://knoxmakers.org/wp-content/uploads/2023/01/learn-to-draw-scaled-e1674754863773.jpg)
![Welding 101](https://knoxmakers.org/wp-content/uploads/2019/01/welding-e1641930678705.jpg)
![Milling](https://knoxmakers.org/wp-content/uploads/2019/01/milling-400.jpg)
![20221119_134258](https://knoxmakers.org/wp-content/uploads/2022/12/20221119_134258-scaled-e1670354889316.jpg)
![Welding 101](https://knoxmakers.org/wp-content/uploads/2019/01/welding-e1641930678705.jpg)
![embrodeiery auth](https://knoxmakers.org/wp-content/uploads/2023/02/embrodeiery-auth-scaled-e1690159639490.jpg)
![macro keyboard](https://knoxmakers.org/wp-content/uploads/2023/02/keyboard-cover-page.png)
![thumbnail New member onboarding](https://knoxmakers.org/wp-content/uploads/2018/05/thumbnail-e1643916853416.png)
![slow-jams](https://knoxmakers.org/wp-content/uploads/2023/01/slow-jams.jpeg)
![SawClockClassPic](https://knoxmakers.org/wp-content/uploads/2023/02/SawClockClassPic-scaled-e1676088879855.jpg)
![Woodworking101](https://knoxmakers.org/wp-content/uploads/2021/06/Woodworking101-scaled-e1659251568660.jpg)
![Blacksmith intro](https://knoxmakers.org/wp-content/uploads/2020/09/Blacksmith-intro-scaled-e1688939455660.jpg)
![power_hammer](https://knoxmakers.org/wp-content/uploads/2022/09/power_hammer-scaled-e1667936572456.jpg)