Hand Cut Dovetails
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Intro to SMAW (aka Stick Welding)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class, we will cover the basics of SMAW (AKA Stick Welding) with E7018 and E6010/E6011 (depending on availability) electrodes.
THIS CLASS WILL BE HELD OUTSIDE AND WILL BE SUBJECT TO THE WEATHER. AN ANNOUNCEMENT WILL BE MADE 48HRS PRIOR TO THE CLASS IF A CANCELLATION IS NECESSARY.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but a class to cover how to stick weld, particularly with the welders we have available at Knox Makers.
We will spend a few minutes refreshing basic safety and area requirements, then we will get right to the welding!
Students are welcome to bring their own PPE, shield, and gloves if they have them, but this is NOT required- we have setups available to use
The cost is $24.96 for Knox Makers members, $74.96 for General Public
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will…
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
We will spend a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We'll also learn how to set up the TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’…
Hand Cut Dovetails
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them.. but these are NOT required as we have set ups for everyone to use.
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox…
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’…
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
We will spend a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We'll also learn how to set up the TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use
Perfect Miters and Splines
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Metal Turning 101 – MSC Lathe Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. **
In this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 3 to 4 hour class, Billy will go over the basics which include work holding, facing, center drilling, drilling, profile turning, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts, power feed, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.
(Not covered in the class: Threading, Boring Knurling, Spherical generation, or tapered turning between centers)
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
CRBG Revival Meeting
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHowdy folks, I'm Andrew Messersmith. I was a member of CRBG from 2012-2019 and President for 2016-2018. I was saddened to hear that CRBG was struggling to find its feet after the Covid years took its toll. I spoke with Honey Bun and we've decided to try and have an Ol' fashioned Revival. This coming Sunday, June 26th at 1:30pm I'd like to invite past, present, and aspiring members to Knox Makers forge at 116 Childress St. in South Knoxville.
The Guild has a lot of work to do to get back inline with the charter, but before we do that we need to rally the troops, find folks interested in being involved and engaged, and just get together, have some fun, and swing a hammer.