Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox…
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them.. but these are NOT required as we have set ups for everyone to use.
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
We will spend a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We'll also learn how to set up the TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Make a Mallet/Thor Hammer
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class we each student will, start to finish, make a joinery mallet. A wedged mortise and tenon will be used to fix the head to the handle and…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’…
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Cutting Torch 101
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is the Authorization Class to use the oxy-fuel cutting torch.
We will spend some time going over safety and then move on to operation of a cutting torch. We will cut out some basic shapes as well as learn some other tricks you can use a torch for.
Students should wear natural fiber clothing (jeans, cotton shirts, etc) NO polyester, spandex or "tech" style clothes. Socks and shoes are required, NO sandals or open toes.
If you have own PPE- please bring safety glasses, leather gauntlets, shade 5 cutting goggles/glasses, and a welding shirt/jacket. *If you do not have this yourself do not worry! We will have gear for you to use!*
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them.. but these are NOT required as we have set ups for everyone to use.
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Tatting 101
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesTatting, an ancient lace making form that dates back to ancient Egypt and China. There's only one knot — a simple half-hitch made over a thread with a shuttle or…
Hand Cut Dovetails
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Intro to SMAW (aka Stick Welding)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class, we will cover the basics of SMAW (AKA Stick Welding) with E7018 and E6010/E6011 (depending on availability) electrodes.
THIS CLASS WILL BE HELD OUTSIDE AND WILL BE SUBJECT TO THE WEATHER. AN ANNOUNCEMENT WILL BE MADE 48HRS PRIOR TO THE CLASS IF A CANCELLATION IS NECESSARY.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but a class to cover how to stick weld, particularly with the welders we have available at Knox Makers.
We will spend a few minutes refreshing basic safety and area requirements, then we will get right to the welding!
Students are welcome to bring their own PPE, shield, and gloves if they have them, but this is NOT required- we have setups available to use
The cost is $24.96 for Knox Makers members, $74.96 for General Public
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will…
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
We will spend a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We'll also learn how to set up the TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’…
Hand Cut Dovetails
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.