Intermediate Oscilloscope Use and Understanding
Knox Makers - VirtualNote: This is a virtual event! Have you used an oscilloscope but most of the buttons and features look like hieroglyphs from a foreign land? Do you want to…
Hand Tool Sharpening
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesBrian will be demonstration and how-to's of sharpening hand planes, gouges, chisels and card scrapers. Will also include hands-on setup/use of these tools.
Cost of the event is $14.96 for members and has a maximum of 6 students.
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Cutting Torch 101
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is the Authorization Class to use the oxy-fuel cutting torch.
We will spend some time going over safety and then move on to operation of a cutting torch. We will cut out some basic shapes as well as learn some other tricks you can use a torch for.
Students should wear natural fiber clothing (jeans, cotton shirts, etc) NO polyester, spandex or "tech" style clothes. Socks and shoes are required, NO sandals or open toes.
If you have own PPE- please bring safety glasses, leather gauntlets, shade 5 cutting goggles/glasses, and a welding shirt/jacket. *If you do not have this yourself do not worry! We will have gear for you to use!*
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter.
You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
We will spend a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We'll also learn how to set up the TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesIntro to MIG welding.
This is the Basic startup class for using the MIG Welder in the Metal Shop.
We will spend about 30 minutes on basic safety and area requirements.
Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)
*The class may run a bit short or long depending on students needs. *
Students should bring their own Welding Shield, gloves and other PPE (Personal Protective Equipment) if they have them.. but these are not required. The Metal Shop has all the required equipment for those who don’t have their own.
Brazing 201
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is an advanced torch class for those who have taken Torch 101 and want to learn how to join metal instead of cutting it apart. You MUST have completed Torch 101 or already be very familiar with oxy-fuel torches to take this class.
We will begin by refreshing safety skills and then move to learning to braze! Students will have shared skills building time and learn the fundamentals of joining metal with flame.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students may bring their own PPE (Personal Protective Equipment) Cutting lenses and gloves if they have them.. but these are NOT required as we have set ups for you to use
LockPicking Intro – Hacking a Lock
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis Is the Authorization class for the Lockpicks and locksport.
We will go over safety and proper use of lockpicking tools and the ethics behind locksport.
“Locksport is the sport or recreation of defeating locking systems. Its enthusiasts learn a variety of skills including lock picking, lock bumping, and a variety of other skills traditionally known only to locksmiths and other security professionals. Locksport followers enjoy the challenge and excitement of learning to defeat all forms of locks, and often gather together in sport groups to share knowledge, exchange ideas, and participate in a variety of recreational activities and contests.”
Upon completion of this course the Student will understand; the physical mechanics of Hacking a pin tumbler lock, the ethics behind lockpicking, and will successfully pick a five pin lock.
There is a maximum of 10 participants. Cost of this event is $24.96 members and 34.96 non members. Includes; Class, 2 Picks, and a Tension Wrench.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Intro to O’scopes, 10am (Sold Out)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe oscilloscope is one of the most powerful (and fun) tools for troubleshooting and observing circuit behaviors. If you've wanted to look beyond DC voltages on a multimeter, which only…
Intro to O’scopes, 11:30am (Sold Out)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe oscilloscope is one of the most powerful (and fun) tools for troubleshooting and observing circuit behaviors. If you've wanted to look beyond DC voltages on a multimeter, which only…
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesIntro to MIG welding.
This is the Basic startup class for using the MIG Welder in the Metal Shop.
We will spend about 30 minutes on basic safety and area requirements.
Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)
*The class may run a bit short or long depending on students needs. *
Students should bring their own Welding Shield, gloves and other PPE (Personal Protective Equipment) if they have them.. but these are not required. The Metal Shop has all the required equipment for those who don’t have their own.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Creating Wood Inlays
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesBrian will be demonstrating the technique he use for making wood inlays. In this class you will practice this technique and create an inlay of a leaf on a piece of ash stock. You will be using marking knives, routers, gouges, chisels and the bandsaw. All materials and tools will be provided, however if you have your own marking knife or gouges you would prefer to use I encourage you bring them.