Woodturned Christmas Ornaments
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesLearn to make wood charm ornaments on the lathe.
You will be making a icicle ornament with a charm inside it. You will leave with a one of a kind ornament. Prior spindle turning experience, or having taken Spindle Turning 101 is a requirement to participate in the class.
Cost of exotic wood selection is included in the ticket price of the class.
I have a small selection of generic charms, and have wire, but if you have specific colors of wire you want to use, or, a specific charm, please go to a hobby store and acquire these items prior to the class.
Cost of the event is $29.96 for members.
Horseshoe Reindeer
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesTime to get into the holiday spirit! Join me in making horseshoe reindeer that will make a great addition to your holiday decorations or a great gift for someone!
No previous welding experience or welding authorization classes are required prior to this class. This is intended to be fun and a great introduction to what you can make with welding!
While we do have some personal protective equipment, you should still show up in close-toed shoes (preferably boots), pants (like blue jeans), and a shirt (non-polyester) with sleeves. When working with welding machines, natural fibers are strongly recommended. We have some hoods, gloves, and welding jackets but feel free to bring your own equipment if you have it.
You will also have the option to paint your reindeer or add a clear coat for protection and rust prevention. If you would like for it to rust that is also fine and a good look for them!
The cost of this class is $29.96 for current Knox Makers Members and $39.96 for non-members. The minimum class size is 2 and the maximum is 6. If the class minimum is not met within 48 hours prior to the class start time, the class will be canceled, and all tickets will be refunded. If the class fills up there is a good chance of another opportunity to attend another class before Christmas.
A Mad Engineer’s Haphazard Guide to Circuit-Bending
Knox Makers - Electronics 116 Childress St SW, Knoxville, TN, United StatesMasks required, free event.
Help make experimental "circuit-bent" keyboards using a crude and simple "try it and see" approach.
A video of a circuit bent musical instrument: https://www.youtube.com/watch?v=ooZCmeGfbEo
We will try to make weird sounds come out of some cheap keyboards that have been donated by a member. These keyboards are reserved for use at a later event, but participants will get their modified keyboards on or after December 21st.
Participants are encouraged to donate to electronics, but this event is free.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWe’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Making Etched Metal Drinkware
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIt is that time of year again. People are trying to get a gift for someone who is hard to shop for. Why not make them something instead? You could also just make something for yourself. This class will guide attendees through the process of creating vinyl graphics that are then applied to stainless steel…
Mutant Toy Parade!
Event Name: Mutant Toy Parade! Date: 12/21 @ 8pm Location: W. Church Avenue &, S Gay St, Knoxville, TN 37902 @ the Rowing Man statue Free and open to the public! Join us on a special "circuit-bent" sidewalk parade coming to Gay Street this Winter Solstice! Knox Makers teams up with Make Music Knoxville to…
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Cost of the event is $19.96 and is for Knox Makers members only.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Cost of the event is $19.96 and is for Knox Makers members only.
Laser Cutter 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.
Mig Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesIntro to MIG welding.
This is the Basic startup class for using the MIG Welder in the Metal Shop.
We will spend about 30 minutes on basic safety and area requirements.
Expect an hour or so of hands on setup and shared MIG welding time (more if needed.)
*The class may run a bit short or long depending on students needs. *
Students should bring their own Welding Shield, gloves and other PPE (Personal Protective Equipment) if they have them.. but these are not required. The Metal Shop has all the required equipment for those who don’t have their own.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Cost of the event is $19.96 and is for Knox Makers members only.
Making a beer can stove
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesMaking a beer can stove. Ultralight backpacking stove that burns alcohol. Any aluminum beverage can will work. You need to have 3 empty cans to make one. There is a maximum of 8 participants. The cost for the class is $14.96 for Knox Maker Members and $19.96 for Non-Members. Directions- Knox Makers parking and entrance…
Creating Wood Inlays
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesBrian will be demonstrating the technique he use for making wood inlays. In this class you will practice this technique and create an inlay of a leaf on a piece of ash stock. You will be using marking knives, routers, gouges, chisels and the bandsaw. All materials and tools will be provided, however if you have your own marking knife or gouges you would prefer to use I encourage you bring them.
Hand Tool Sharpening
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesBrian will be demonstration and how-to's of sharpening hand planes, gouges, chisels and card scrapers. Will also include hands-on setup/use of these tools.
Cost of the event is $14.96 for members and has a maximum of 6 students.
Perfect Miters and Splines
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThe miter is one of the most difficult joinery techniques to execute well. Error in fitment is additive which manifests a "last corner" in a box or picture frame that does not close up. In this class we will demonstrate tips and tricks to making perfect fitting miter joints every time. We will also demonstrate how to safely implement spline reinforcement for added stability and decorative enhancement of the joint. This will involve advanced table saw use, jigs and sleds, layout techniques, shooting board use and an increased state of happiness in ones future work.
This class is limited to 5 students. The cost is $19.96 for Knox Makers members, $39.96 for General Public
Inkscape 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is a free and open sourced vector graphics editor. It is the primary software used to interface with Knox Makers’ laser cutter, CNC router, and vinyl cutters. This class will teach basics of drawing and arranging shapes, talk about vectors and paths, and give a general overview of Inkscape and its capabilities.
Computers will be provided, but if you want to use your own, you can download Inkscape at inkscape.org
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
Inkscape 201: Inkscape for the Laser
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesInkscape is the primary vector graphics editor used at Knox Makers. In this secondary class, some useful extensions and processes common to the laser will be taught, including:
- hatch fill extension
- engraving raster images
- node editing and tracing
- figuring out slots and tabs
Computers will be provided and a basic knowledge of Inkscape is expected of participants. If you wish to bring your own laptop, please download Inkscape at inkscape.org and come a few minutes early to make sure it is set up properly.
There is a maximum of 6 participants. The cost for the class is $19.96 for Knox Maker Members and $29.96 for Non-Members.
Hand Cut Dovetails
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 2 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
Annual Members Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesThis week we will be having our annual members meeting. We will go over the state of the organization, what we have accomplished in the past year, and what our plans moving forward in 2022 are. We will also vote on board members and bylaw changes. This event is for current, paying Knox Makers members…
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
Cost of the event is $19.96 and is for Knox Makers members only.