Metal Turning 101 – MSC Lathe Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. **
In this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 3 to 4 hour class, Billy will go over the basics which include work holding, facing, center drilling, drilling, profile turning, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts, power feed, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.
(Not covered in the class: Threading, Boring Knurling, Spherical generation, or tapered turning between centers)
There will be a fee of $24.96 for members.. There will be a maximum of 6 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
MIG Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
Paper Mache Mask Making
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis class will meet for three consecutive sessions beginning Tuesday, September 6 in the Arts & Crafts area. There will be 15 minutes of talk followed by 45 minutes of coaching and parallel play prior to Show & Share - then free play after that. The first session will build a custom mold for each…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Mortise and Tenon Joinery
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesFitting a square hole and corresponding square peg together is a convenient mechanical joint for a variety of assemblies. In this class I will demonstrate a variety of techniques which can be used to accomplish this task and create well-fitting and functional mortise and tenon joinery. Topics covered will include; anatomy of the joint, rationale for layout and proportions, hand-cut mortising (techniques and tools), machine-cut mortising, hand-cut tenons, machine cut tenons (with and without jigs), dowel riving and drawbore pinning. Terms you will understand by the end of class include, haunch, drawbore, wedged, dual tenon, and riven. Tools used will include mortising gauge, marking gauge, scribe, joinery mallet, carcass saw, tenon saw, router plane, rebate/rabbit plane, bench chisels, mortising chisels (English and Western), dowel plate, square mortising machine, table saw, dado stack, and tenoning jig.
The cost is $24.96 for Knox Makers members, $49.96 for General Public
Paper Mache Mask Making
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis class will be a duplicate of the previously announced Tuesday night class This class will meet for three consecutive sessions beginning Monday, September 12th in the Arts & Crafts area. The first session will build a custom mold for each participant's face. The second will build a mask. The third will decorate and paint…
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context…
Fiber Arts Q&A Workshop
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesDROP IN PROJECT HELP
Come to this Fiber Arts workshop to get all your random questions answered. Make your old clothes new again; repair a zipper, tear, or button; get help reading a pattern! Anything goes!
Intro to Electronics
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHave you been interested in electronics but don't know where to start? This class does not assume any prior experience or knowledge whatsoever so here's your chance! Attendees will learn about basic concepts such as voltage, current, resistance and use of LEDs and mechanical switches and jumpers. Multimeters will be used to measure voltages and…
MIG Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
Laser Cutting Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building. Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is…
Going from Schematics to Breadboards
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHave you seen cool circuits you wanted to build but weren't sure where to start? We've got you covered! In this class Ray will lead you step by step through reading a schematic and translating it into a prototype on a solderless breadboard. Each attendee will build a circuit using an integrated circuit, resistors, capacitors…
Brazing 201
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is an advanced torch class for those who have taken Torch 101 and want to learn how to join metal instead of cutting it apart. You MUST have completed Torch 101 or already be very familiar with oxy-fuel torches to take this class.
We will begin by refreshing safety skills and then move to learning to braze! Students will have shared skills building time and learn the fundamentals of joining metal with flame.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students may bring their own PPE (Personal Protective Equipment) Cutting lenses and gloves if they have them.. but these are NOT required as we have set ups for you to use
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building. Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is…
Power Hammer Authorization – LG25 “Thumper”
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the latest addition to the blacksmith shop, Thumper, Our 25lb Little Giant PowerHammer! This class will cover operational maintenance, necessary lubrication points, how to swap out dies, things to watch out for on this nearly 80 year old machine, and plenty of forging time to get comfortable with its capabilities.…
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
Let’s Make a Metal Flower
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn this class, we will be making a flower out of metal! As posted this class will be 4 hours but may be less or could be more depending on how we progress. No experience is needed! I will be able to walk anyone through what to do. We will be welding and creating sparks,…