Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. *****
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
Annual Members Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesThis week we will be having our annual members meeting. We will go over the state of the organization, what we have accomplished in the past year, and what our plans moving forward in 2019 are. We will also vote on board members and bylaw changes. This event is for current, paying Knox Makers members…
Wood Shop 101: An introduction to the Woodworking Zone
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesFred will teach you about safety, basic use and unique features of the power tools in the woodworking area. At the completion of this course, you will be authorized to use the equipment without supervision. Details on how to use the equipment on specific projects will be covered in later courses.
There will be a fee for this class of $9.96 for current Knox Makers members. There will be a maximum of 10 spots for this class, and a minimum of 5 tickets must be sold. If the class minimum is not met 24 hours prior to class start time, the class will be canceled and all tickets will be refunded.
February Board Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public.
Intro to Electronics
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesHave you been interested in electronics but don't know where to start? This class does not assume any prior experience or knowledge whatsoever so here's your chance!
Attendees will learn about basic concepts such as voltage, current, resistors and capacitors. Intuitive analogies and diagrams will be used, minimal math beyond a few bits of basic algebra will be presented.
Laser Cutter 101
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Goldfinger. Daniel will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Goldfinger or need/want a review of its operation.
Metal Turning 101 – Grizzly Lathe Tool Authorization
Knox Makers 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. **
In this class you will receive basic hands on experience in operating a Grizzly G0602 10" x 22" Lathe. During this 3 to 4 hour class, Billy will go over the basics which include work holding, facing, center drilling, drilling, profile turning, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts, power feed, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.
(Not covered in the class: Threading, Boring Knurling, Spherical generation, or tapered turning between centers)
Welding 101 – Intro to Welding
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesRob will be leading an Intro to Welding.
This is the Basic startup class for using the Mig Welding in the Metal Area.
We will spend 30 minutes on basic safety and area requirements.
Then expect an hour of hands on setup and shared MIG welding time
I’m going to limit the number of students to 5 , so each person get enough hands on time to be able to feel comfortable using the MIG welder
Students should bring their own shield and gloves, if they have them. But they are not required, as we have setups available to use.
Please do NOT bring your own welding equipment to use, the setup and testing time could impact other students.
Monsters Made with Love Fleece Workshop
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesLaurie will help makers of all ages create a 4 inch fleece monster with a self-love twist. While a younger child can enjoy the art of creating their own personalized toy, teenagers can create an expression of their personality and adults will enjoy honing their hand sewing and crafting skills in an inventive way. This…
Open Hack Night and Badges, We Need Some Stinking Badges! – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesJoin us after show and share in the Arts and Crafts zone for a badges making class. We will have plenty of things you can add to your standard name tag to give it some extra flair*
*Flair not required.
Machining 100 – Intro To Machining
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw. **This is a prerequisite for the Bridgeport Mill and Lathe tool authorization classes**
Using, Choosing and Abusing Transistors
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesElectronics enthusiasts use transistors as switches and amplifiers in a wide range of applications. While they are relatively simple devices they are often a source of confusion and frustration when we are called upon to use them. NPN? PNP? MOSFET? JFET? Which of the 10,000 in the catalog is the right choice? In this class…
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. *****
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
Open Hack Night and 10 Ways to Approach Content Strategy – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesHaving a tough time writing content for your blog? James runs through a shortlist of types of content to use when planning out your editorial calendar. These can be used throughout the year as bonus content, to help fill out a full content calendar, and to help combat creative writing blocks. This talk includes a challenge for all attendees to try.
New Members Onboarding
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesKnox Makers will host a member onboarding session for new members. This night will start with a brief overview of the resources, rules, and goals of Knox Makers. Afterwards, members should feel welcome to stay and socialize. The focus of this evening will be on members who are new to Knox Makers, but older members…
March Board Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public.
Intro to Electronics
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesHave you been interested in electronics but don't know where to start? This class does not assume any prior experience or knowledge whatsoever so here's your chance! Attendees will learn about basic concepts such as voltage, current, resistors and capacitors. Intuitive analogies and diagrams will be used, minimal math beyond a few bits of basic…
Woodworking 101: Intro to the woodshop
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesFred will teach you about safety, basic use and unique features of the power tools in the woodworking area. At the completion of this course, you will be authorized to use the equipment without supervision. This class is for current paying Knox Makers members and has a fee of $9.96. There will be a maximum…
Woodworking 102: Proper use of the SawStop
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesLearn how to safely use the Sawstop. Course covers: 1. What materials can be cut without triggering the brake. 2. How to test is something will trigger the brake. 3. Bypassing the brake. 4. How to change the blade and brake to/from the new dado set. 5. How to make a dado cut. 6. Advanced…
Machining 100 – Intro To Machining
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw. **This is a prerequisite for the Bridgeport Mill and Lathe tool authorization classes**