Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Blacksmithing: Whack n’ Yack
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesJoin us in the forge for an opportunity to work and learn with other smiths at Knox Makers. This loosely structured event will include a short demonstration of a technique,…
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
This is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Woodworking 103 – bandsaw authorization
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesLearn how to use the three bandsaws in the woodworking zone safely and effectively. Operation will include: how to avoid damaging the bandsaw blade, when it requires replacement and how to do that; how to adjust the blade guard and guides. Which materials can be cut and the appropriate type/size blade to use and those which must never be cut on these bandsaws. There will be discussions and demonstrations regarding how to re-saw thick wood into thinner boards and how to safely cut round and odd-shaped pieces of wood. Participants will have the opportunity for hands-on experience bandsawing a piece of wood. Dust masks are recommended.
The cost is $24.96 for Knox Makers members, $39.96 for General Public. There will be a maximum of 6 spots of this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Woodworking 302 – Pen Turning
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesYou MUST have completed Woodworking 102 - Woodturning Basics prior to taking this class. This class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder.
Learn how to make a ball-point pen using wood or plastic resin barrel blanks. This class will cover how to prepare the materials for the pen’s barrel, discuss and demonstrate additional materials and accessories, and the final assembly and finishing methods commonly used. Pen kits and additional materials will be provided and participants will leave with a completed pen.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
There is a minimum of 3 and a maximum of 6 attendees. If the minimum is not met 24 hours before class starts, the class will be canceled and ticket purchases refunded.
Blacksmithing Authorization – Intro to Forging
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.
This class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.
Learn to Crochet
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class was made for the beginner. No prior knowledge required. The snowflake pattern uses repetition of a few basic stitches. Better yet is that the finished project doesn’t have to be perfect. What snowflake is?
All materials are provided plus we will match you to the size of hook that works best for you and your yarn selection.
The cost is $9.96 for Knox Makers members, $24.96 for General Public. There will be a maximum of 6 spots for this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class will be canceled and all tickets will be refunded.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Woodworking 102 – Woodturning Basics
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis is the basic authorization class for using the wood lathes in the wood working zone. In this class Neil will begin by covering the basics of how to operate…
Stitch n Bitch
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIf you are fiber-curious, come see what others are working on. We have members who sew clothing and costumes, knit, crochet, weave, quilt, embroider, and many other bitch-and-stitch arts.
Our monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.
RSVP is not required, just show up when you can and stay however long you can.
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox…
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Woodworking 202 – Advanced Turning
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesYou MUST have completed Woodworking 102 “Woodturning Basics” prior to taking this class. This class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder. There will be a short discussion regarding the variety of projects that can be accomplished on a wood lathe: utilitarian, decorative and artistic. Turning skills covered in this class will include: resourcing, preserving and preparing wood for turning; options for mounting wood on the lathe; the vast variety of tools, how they are used and sharpened; other materials that can be turned on a wood lathe; sanding and finishing options. Hands-on opportunities will include, but may not be limited to if time permits, starting a hollow form such as a bowl.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
Embroidery Machine Auth
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.
For the more advanced, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants.
As the Lathe Turns
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesAnything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
This is a free hang out session dedicated to wood turning. Come happy and leave with rounded things.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
This is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.