Postponed Learn to Sew
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer, how to use some of the most basic stitches, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet, wind their bobbins, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.
Attendees are encouraged to bring their own, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.
The cost of the event is $39.96 for non Knox Makers members and $29.96 for Knox Makers members. There is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.
There is a maximum of 4 participants. There is a 1 participant minimum.
Postponed Heat Press Auth (Includes Sublimation Printer)
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesSublimation printing is soft on fabric like silk screening and not stiff like HTV (heat transfer vinyl.) Come learn how to print your favorite image on special paper then use the heat press to transfer it to a shirt, hat, mug, tumbler or plate. While this class is focused on sublimation, the heat press is not limited to only sublimation prints. You can press HTV designs cut out on the Silhouette or vinyl cutter.
There will be a short talks on how to and not to press each item integrated with hands on time. Every student will press their name onto the auth shirt and leave with a 15oz coffee cup or 20oz tumbler printed with a design of their choice.
Pre-requisites: Create an image of your name for the shirt and up to a 4" x 9.5" image for your mug.
Canceled Stitch n Bitch
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesCome and hang out in Fiber Arts. Just bring a project to work on, hang out and have fun! Directions- Knox Makers parking and entrance is located around the back…
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox…
Tormek Sharpening Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesCome learn how to use our Tormek T-8 sharpening system. This is a water-cooled grinding system that offers an alternative to the hand sharpening technique taught in the "hand tool sharpening and setup" class. We will cover basic setup and proper use of as many jigs as we can get through. At the end of this class you should be able to sharpen your gouges, irons and chisels without hurting yourself or destroying our fancy new toy.
Annual Members Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesThis week we will be having our annual members meeting. We will go over the state of the organization, what we have accomplished in the past year, and what our…
Learn to Sew
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer, how to use some of the most basic stitches, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet, wind their bobbins, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.
Attendees are encouraged to bring their own, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.
The cost of the event is $39.96 for non Knox Makers members and $29.96 for Knox Makers members. There is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.
There is a maximum of 4 participants. There is a 1 participant minimum.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Small Repairs with Hand Sewing
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIt’s time to dig into your mending pile. Skills to be covered - reattaching a missing button and reinforcing damaged buttonholes, darning small holes in those favorite sweaters or t-shirts…
Heat Press Auth (Includes Sublimation Printer)
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesSublimation printing is soft on fabric like silk screening and not stiff like HTV (heat transfer vinyl.) Come learn how to print your favorite image on special paper then use the heat press to transfer it to a shirt, hat, mug, tumbler or plate. While this class is focused on sublimation, the heat press is not limited to only sublimation prints. You can press HTV designs cut out on the Silhouette or vinyl cutter.
There will be a short talks on how to and not to press each item integrated with hands on time. Every student will press their name onto the auth shirt and leave with a 15oz coffee cup or 20oz tumbler printed with a design of their choice.
Pre-requisites: Create an image of your name for the shirt and up to a 4" x 9.5" image for your mug.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
FreeCAD 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesFreeCAD is a free and open source CAD application. This class is intended for people who wish to learn the basics of CAD modeling through the use of FreeCAD. Attendees will learn and follow a basic workflow, draw 2D shapes, convert those 2D shapes to 3D shapes, and combine them to model a coffee cup.
While CAD is useful for 3D printing, machining, metalworking, woodworking, and many other fields, this introductory class will NOT cover specifics on how to apply this knowledge to those fields. Instead, the knowledge obtained in this class acts as a foundation for the attendees to build upon.
FreeCAD is under active development. While the general workflow within FreeCAD stays the same between versions, icons and labels often change. To prevent confusion and to help ensure all attendees are on the same page throughout the class, attendees will use Knox Makers laptops which have FreeCAD installed and configured.
Intro to Jewelry Soldering 101
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesIntro to Jewelry Soldering.
This is the Basic startup class for Soldering Jewelry in the Machining Area. We will spend 30 minutes on basic safety and area requirements. Then expect an hour of hands on setup and soldering a copper ring.
I’m going to limit the number of students to 3 , so each person get enough hands on time to be able to feel comfortable soldering with a torch.
No special PPE is required
Please do NOT bring your own jewelry to solder, the time helping you could impact other students.
Intro Arduino: Using Encoders
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesEncoders are useful for user input in a variety of projects. But it can be tricky to get them to work, and work well. Rather than avoid them, embrace them...…
Learn to Sew
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer, how to use some of the most basic stitches, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet, wind their bobbins, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.
Attendees are encouraged to bring their own, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.
The cost of the event is $39.96 for non Knox Makers members and $29.96 for Knox Makers members. There is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.
There is a maximum of 4 participants. There is a 1 participant minimum.
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Small Alterations or Mending with a Machine
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIt’s time to dig deeper into the mending pile. Make that pair of pants that are too short into capris or shorts or simply shorten some jeans with a machine…
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
This is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Metal Turning 101 – MSC Lathe Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. **
This is a hands on class and is subject to run over the allotted 4 hours. Please make sure your schedule is free accordingly.
In this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 3 to 4 hour class, David will go over the basics which include work holding, facing, center drilling, drilling, profile turning, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts, power feed, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.
(Not covered in the class: Threading, Boring Knurling, Spherical generation, or tapered turning between centers)
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!