New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
TIG Welding 201
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the advanced class for authorization on the TIG Welder and Plasma Cutter. You MUST have completed Welding 101 (Intro to MIG) or already feel very comfortable welding before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG. We will spend a few…
Fangs, Tusks, Horns, and Claws – Oh My!
Knox Makers - Arts and Crafts 116 Childress St SW, Knoxville, TN, United StatesMaking Fangs, Tusks, Horns, and Claws with Moldable Plastic This class will meet on Tuesday, September 27 in the Arts & Crafts area. There will be 15 minutes of talk followed by 45 minutes of coaching and parallel play prior to Show & Share - then free play after that.We will build a custom mold…
Arduino: From the Ground Up
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIf you have ever wanted to add electronic features to a project but were intimidated by the complexity, Arduino is for you. Literally designed with artists in mind, Arduino makes it easy to create rational objects; devices you can explain your intentions and desires to. In this workshop, Issac will introduce you to the Arduino…
Build a Blinking Knox Makers Badge
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHave you wanted to learn to solder or wanted to build a cool piece of Knox Makers swag? Join us for a guided build of the battery powered badge/ornament/desk-piece/gift/however-you-use-it pictured above and then take it home to earn geek street cred among your soon-to-be-jealous friends. The board consists of 13 components including resistors, LEDs and…
Cutting Torch 101
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is the Authorization Class to use the oxy-fuel cutting torch.
We will spend some time going over safety and then move on to operation of a cutting torch. We will cut out some basic shapes as well as learn some other tricks you can use a torch for.
Students should wear natural fiber clothing (jeans, cotton shirts, etc) NO polyester, spandex or "tech" style clothes. Socks and shoes are required, NO sandals or open toes.
If you have own PPE- please bring safety glasses, leather gauntlets, shade 5 cutting goggles/glasses, and a welding shirt/jacket. *If you do not have this yourself do not worry! We will have gear for you to use!*
Arduino 101 – Introduction to Electronics and Computing
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIf you have ever wanted to add electronic or computer features to a project, but were intimidated by the complexity, Arduino is for you. Literally designed with artists in mind, Arduino makes it easy to create rational objects; devices you can simply explain your intentions and desires to. This class is built around the ebook…
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Halloween Spook Show
Central Cinema 1205 N Central St, Knoxville, TN, United StatesNote, this event is held at Central Cinema, not Knox Makers. Please RSVP if you intend to come. Central Cinema 1205 N Central St Knoxville, TN 37917 Join us, if you dare, for the return of the annual Knox Makers Halloween Spook Show! This year, we've rented an entire movie theater! We’ll supply pizza…
Arduino 101 – Introduction to Electronics and Computing
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis class is one of a 3 part series. If you are a Knox Makers member and are interested in joining mid-stream, please DM Joe Pardue on Mattermost. This class will be from 6-7:30pm.
Laser Cutting Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…
MIG Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
Arduino 101 – Introduction to Electronics and Computing
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis class is part of a 3 part series. If you are a Knox Makers member and are interested in joining mid-stream, please DM Joe Pardue on Mattermost. This class will be from 6-7:30pm.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
October Maker Mingle
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIn conjunction with Spark, Knox Makers is hosting The Maker City's October "Maker Mingle" event. Maker Mingles are casual gatherings to meet up with other makers, check out a maker space, and enjoy a little social time. Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the…
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Arduino 101 – Chapter 4
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesArduino 101 – Chapters 4 to 8
For those who have finished Arduino 101 and want to continue with the in person classes at Knox Makers, you can sign up for the remaining classes for $14.96 for Knox Makers members and $19.96 for the general public. All of the proceeds from this class, above the cost of the kits, will go to the Knox Makers Electronics area. This class is a bargain, so if you want to also donate to Knox Makers and designate the electronics section for the gift, that would be great. These 4 classes will continue on Mondays from 6:00 pm to 7:30 pm on the following dates (note we skip Halloween):
November 7: Chapter 4
November 14: Chapter 5
November 21: Chapter 6
November 28: Chapter 7
December 5: Chapter 8
Intro to TIG Welding (TIG Welding 201)
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the next class in the welding series granting authorization on the TIG Welders and Hand Plasma Cutter. You MUST have completed Introduction to Metalworking (MIG 101) or already be a non-novice welder before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.…