Skip to content

Views Navigation

Event Views Navigation

Today

Intro to SMT: Build an Atari Punk Console

Knox Makers - Virtual

The Atari Punk Console is a retro synth circuit that appeared as a Stepped Tone Generator in a Forest Mimms book, available at Radio Shack long ago. Paying homage to the digital sounds of 1980's Atari console games, it makes some fun, or horrifically awful if you're not one of us, noises that delights the…

$19.96

Woodturning 101: Spindle Turning

Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United States

Tim will teach the techniques of spindle turning, tool use and movements, tool sharpening, and basic lathe operation. You must be authorized to use the woodworking zone to participate in this class

$24.96

Woodworking 101

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

This class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.

Cost of the event is $19.96 and is for Knox Makers members only.

$19.96

Blacksmithing Authorization – Intro to Forging

Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United States

This class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building.

Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.

$14.96

Laser Cutter 101

Knox Makers - Lasercutting 116 Childress St SW, Knoxville, TN, United States

This is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.

If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.

Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a maximum of five participants.

You can find Inkscape at: https://inkscape.org/
You can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser

$9.96

Woodworking 101

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

This class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.

Cost of the event is $19.96 and is for Knox Makers members only.

$19.96

Woodturning 101: Spindle Turning

Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United States

Learn how to use the lathe, how to use the chuck, proper use of the lathe tools, how to sharpen the tools, and the basics of spindle turning

$24.96

Woodworking 101

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

This class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.

Cost of the event is $19.96 and is for Knox Makers members only.

$19.96

Machining 100 – Intro To Machining

Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States

Billy will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.

$9.96

Milling 101 – Bridgeport Mill Tool Authorization

Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States

** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **

In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.

There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.

$24.96

New Members Onboarding

Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United States

Whether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding! We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to…

Free

Laser Cutter 101

Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United States

This is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…

$9.96

Woodworking 101

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

This class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process…

$19.96

Woodworking 101

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

This class will cover topics related to safe and correct operation of equipment within the woodworking area. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process…

$19.96

Laser Cutter 101

Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United States

This is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.

If you were authorized on Goldfinger, there is no need to take this class. For a review of the new laser, please stop by the shop after this class or on a Tuesday to get a tour of the new machine.

Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of five participants.

$9.96

Hand Tool Sharpening

Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United States

Brian will be demonstration and how-to's of sharpening hand planes, gouges, chisels and card scrapers. Will also include hands-on setup/use of these tools.

Cost of the event is $14.96 for members and has a maximum of 6 students. 

$19.96
Scroll To Top