Embroidery Machine Auth
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.
For the more advanced, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants.
Woodworking 202 – Advanced Turning
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesYou MUST have completed Woodworking 102 “Woodturning Basics” prior to taking this class. This class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder. There will be a short discussion regarding the variety of projects that can be accomplished on a wood lathe: utilitarian, decorative and artistic. Turning skills covered in this class will include: resourcing, preserving and preparing wood for turning; options for mounting wood on the lathe; the vast variety of tools, how they are used and sharpened; other materials that can be turned on a wood lathe; sanding and finishing options. Hands-on opportunities will include, but may not be limited to if time permits, starting a hollow form such as a bowl.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
As the Lathe Turns
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesAnything and everything about woodturning is possible at As The Lathe Turns. Discussions and demonstrations, Tools and tips. Hacks and help. Thinking about buying a lathe but you don't know which one? What's the best tool for hollowing a bowl or box? Not sure about that special piece of wood, how to cut it and mount it on the lathe? Woodturners (and wannabe woodturners) talking with other woodturners about woodturning.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
This is a free hang out session dedicated to wood turning. Come happy and leave with rounded things.
“It’s a Lamp” Builders Class
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesIt's A Lamp!
Learn how to turn your treasures (junk?) into a beautiful object of illumination. This basic course covers parts of a lamp, wiring, safety, assembly, and of course, lightin' it up! Materials will be provided. If you want to turn something into a lamp, contact Russell for prior approval. Otherwise, you'll have everything you need! Just add imagination.
This is a BYOB event (Bring Your Own Bulb).
Stitch n Bitch
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIf you are fiber-curious, come see what others are working on. We have members who sew clothing and costumes, knit, crochet, weave, quilt, embroider, and many other bitch-and-stitch arts.
Our monthly meeting is meant to be a time to relax and indulge in any or all fiber arts hobbies. Whether you’re an expert or a novice come hang out for all or any part of the fiber fun.
RSVP is not required, just show up when you can and stay however long you can.
Moonraker 101
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Moonraker or need/want a review of its operation.Laptops will be provided for this class.
Help installing the software on your own laptop can be provided outside of class.In class we will be using Inkscape and the laser cutting extension bundle we’ve put together for it. There is a minimum of two participant and maximum of six participants.
You can find Inkscape at: https://inkscape.org/
You can find the KM-Laser bundle at: https://github.com/KnoxMakers/KM-Laser
Embroidery Machine Auth
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.
For the more advanced, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Intro to Digital Signal Processing: Image and Sound Filtering
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesDSP (digital signal processing) takes real-world signals such as images, sound, and sensor signals and manipulates them in many ways to make them more useful to us. Most of us have used filters to sharpen or soften images, remove noise, increase/reduce contrast etc. using our phones or computers. This often uses the so-called "convolution filter".…
Intro to Electronics
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHave you been interested in electronics but don't know where to start? This class does not assume any prior experience or knowledge whatsoever so here's your chance! Attendees will learn about basic concepts such as voltage, current, resistance and use of LEDs and mechanical switches and jumpers. Multimeters will be used to measure voltages and…
Small Alterations or Mending with a Machine
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIt’s time to dig into the mending pile. Make that pair of pants that are too short into capris or shorts or simply shorten some jeans with a machine hem. Extend short pockets and add pockets in the seamline to loose skirts or slacks. This technique is not compatible with silhouette hugging skirts or slacks.…
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Build a Power Supply for a Solderless Breadboard
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesHere's your chance to build a truly useful project! This USB-C or USB-Micro powered PCB interfaces nicely with a standard solderless breadboard, providing 3.3V and/or 5.0V for your prototyping. We will explain basic soldering concepts for both through-hole and surface mount (SMT) soldering. The SMT components are mostly on the larger side, similar to our…
Cleaning Day!
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesIt’s time to shake loose the cobwebs and sweep up the dust. Come help as we clean up, move around, wipe down and organize our space.
Embroidery Machine Auth
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis is the authorization class needed to use the Brother Innov-is NQ1700E Embroidery Machine. The general format of the class covers choosing the right stabilizer and needle for your project, hooping, designing and stitching it. A hands-on approach will show the basics of how to turn the preloaded text and images into fabric art.
For the more advanced, loading up a pes file format embroidery design of your own will be covered. Class time will vary depending on number of questions and skill level of participants.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Knox Makers Market
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesJoin us for our second Knox Makers Makers Market!
We are planning to have 40 vendors and multiple food trucks for this event all with their own crafted goods!
We will be offering tours of our facility periodically throughout the day and possibly demos over various zones!
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!