Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Intro to Metalworking (MIG 101)
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them. but these are NOT required as we have setups for everyone to use.
Please do NOT bring your own welding machines to use, the setup and testing time could impact other students.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Woodworking 102 – Woodturning Basics
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis is the basic authorization class for using the wood lathes in the wood working zone. In this class Neil will begin by covering the basics of how to operate a wood lathe safely. The rest of the class will focus on turning a spindle which is characterized by turning a piece in which the…
Intro to Jewelry Soldering 101
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesIntro to Jewelry Soldering.
This is the Basic startup class for Soldering Jewelry in the Machining Area. We will spend 30 minutes on basic safety and area requirements. Then expect an hour of hands on setup and soldering a copper ring.
I’m going to limit the number of students to 3 , so each person get enough hands on time to be able to feel comfortable soldering with a torch.
No special PPE is required
Please do NOT bring your own jewelry to solder, the time helping you could impact other students.
Intro to TIG Welding (GTAW 201)
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesYou MUST have completed Introduction to Metalworking (MIG 101) or already be a non-novice welder before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
This is the next class in the welding series granting authorization on the TIG Welders and Hand Plasma Cutter.
We will spend just a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We’ll also learn how to set up a TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use.
Open Hack Night – Public Welcome
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesOpen hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
Canceled CANCELED: New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Woodworking 202 – Advanced Turning
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesYou MUST have completed Woodworking 102 “Woodturning Basics” prior to taking this class. This class is a continuation of basic woodturning skills beyond spindles and it will include a brief safety reminder. There will be a short discussion regarding the variety of projects that can be accomplished on a wood lathe: utilitarian, decorative and artistic. Turning skills covered in this class will include: resourcing, preserving and preparing wood for turning; options for mounting wood on the lathe; the vast variety of tools, how they are used and sharpened; other materials that can be turned on a wood lathe; sanding and finishing options. Hands-on opportunities will include, but may not be limited to if time permits, starting a hollow form such as a bowl.
Class members are encouraged to bring eye protection (full face shields are ideal. Do not wear any long, loose-fitting clothing, long sleeve shirts, bracelets, rings or low hanging neck chains. A hat would be appropriate if you don’t want to be picking woods chips out of your hair.
Canceled Electronics Art Sculpturing (Canceled)
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesLet's engage our creative side in the electronics zone! In this class, attendees will assemble a USB-powered PCB disc upon which they can build whatever creative sculpture they can imagine. The base has positions for resistors and LEDs to light the sculpture, if desired. A variety of component shapes, sizes, colors and appearances will be…
Postponed Learn to Sew
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer, how to use some of the most basic stitches, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet, wind their bobbins, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.
Attendees are encouraged to bring their own, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.
The cost of the event is $39.96 for non Knox Makers members and $29.96 for Knox Makers members. There is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.
There is a maximum of 4 participants. There is a 1 participant minimum.
Postponed Heat Press Auth (Includes Sublimation Printer)
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesSublimation printing is soft on fabric like silk screening and not stiff like HTV (heat transfer vinyl.) Come learn how to print your favorite image on special paper then use the heat press to transfer it to a shirt, hat, mug, tumbler or plate. While this class is focused on sublimation, the heat press is not limited to only sublimation prints. You can press HTV designs cut out on the Silhouette or vinyl cutter.
There will be a short talks on how to and not to press each item integrated with hands on time. Every student will press their name onto the auth shirt and leave with a 15oz coffee cup or 20oz tumbler printed with a design of their choice.
Pre-requisites: Create an image of your name for the shirt and up to a 4" x 9.5" image for your mug.
Canceled Stitch n Bitch
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesCome and hang out in Fiber Arts. Just bring a project to work on, hang out and have fun! Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Knox Makers is a place for the Knoxville area’s engineers, artists, hobbyists, innovators, educators and entrepreneurs…
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
Tormek Sharpening Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesCome learn how to use our Tormek T-8 sharpening system. This is a water-cooled grinding system that offers an alternative to the hand sharpening technique taught in the "hand tool sharpening and setup" class. We will cover basic setup and proper use of as many jigs as we can get through. At the end of this class you should be able to sharpen your gouges, irons and chisels without hurting yourself or destroying our fancy new toy.
Annual Members Meeting
Knox Makers 116 Childress St SW, Knoxville, TN, United StatesThis week we will be having our annual members meeting. We will go over the state of the organization, what we have accomplished in the past year, and what our plans moving forward in 2022 are. We will also vote on board members and bylaw changes. This event is for current, paying Knox Makers members…
Learn to Sew
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesThis class covers the basics of using a sewing machine. A discussion on which additional tools are needed to be a successful sewer, how to use some of the most basic stitches, and how to maintain and troubleshoot your machine. Attendees will learn how to change needles and presser feet, wind their bobbins, thread their machine and bobbin and experience the outcome of adjustments to length and width. Everyone leaves with a drawstring bag.
Attendees are encouraged to bring their own, personal machines to this class. No machine? No problem. We have one you can use. All other materials for this class will be provided and are included in the fee.
The cost of the event is $39.96 for non Knox Makers members and $29.96 for Knox Makers members. There is a maximum of 4 participants. Class time may run longer depending on the number of students and abilities coming into the class.
There is a maximum of 4 participants. There is a 1 participant minimum.
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Small Repairs with Hand Sewing
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesIt’s time to dig into your mending pile. Skills to be covered - reattaching a missing button and reinforcing damaged buttonholes, darning small holes in those favorite sweaters or t-shirts and fixing dress slacks hems. Bring two small repairs to class for hands on practice. Directions- Knox Makers parking and entrance is located around the…
Heat Press Auth (Includes Sublimation Printer)
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesSublimation printing is soft on fabric like silk screening and not stiff like HTV (heat transfer vinyl.) Come learn how to print your favorite image on special paper then use the heat press to transfer it to a shirt, hat, mug, tumbler or plate. While this class is focused on sublimation, the heat press is not limited to only sublimation prints. You can press HTV designs cut out on the Silhouette or vinyl cutter.
There will be a short talks on how to and not to press each item integrated with hands on time. Every student will press their name onto the auth shirt and leave with a 15oz coffee cup or 20oz tumbler printed with a design of their choice.
Pre-requisites: Create an image of your name for the shirt and up to a 4" x 9.5" image for your mug.