Arduino 101 – Chapter 6
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesArduino 101 – Chapters 4 to 8
For those who have finished Arduino 101 and want to continue with the in person classes at Knox Makers, you can sign up for the remaining classes for $14.96 for Knox Makers members and $19.96 for the general public. All of the proceeds from this class, above the cost of the kits, will go to the Knox Makers Electronics area. This class is a bargain, so if you want to also donate to Knox Makers and designate the electronics section for the gift, that would be great. These 4 classes will continue on Mondays from 6:00 pm to 7:30 pm on the following dates (note we skip Halloween):
November 7: Chapter 4
November 14: Chapter 5
November 21: Chapter 6
November 28: Chapter 7
December 5: Chapter 8
MIG Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
Arduino 101 – Chapter 7
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesArduino 101 – Chapters 4 to 8
For those who have finished Arduino 101 and want to continue with the in person classes at Knox Makers, you can sign up for the remaining classes for $14.96 for Knox Makers members and $19.96 for the general public. All of the proceeds from this class, above the cost of the kits, will go to the Knox Makers Electronics area. This class is a bargain, so if you want to also donate to Knox Makers and designate the electronics section for the gift, that would be great. These 4 classes will continue on Mondays from 6:00 pm to 7:30 pm on the following dates (note we skip Halloween):
November 7: Chapter 4
November 14: Chapter 5
November 21: Chapter 6
November 28: Chapter 7
December 5: Chapter 8
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
The cost is $19.96 for Knox Makers members, $39.96 for General Public
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Machining 100 – Intro To Machining
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United StatesBilly will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw.
Milling 101 – Bridgeport Mill Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. **
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Metal Turning 101 – MSC Lathe Tool Authorization
Knox Makers - Machining 116 Childress St SW, Knoxville, TN, United States** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Metal Turning 101 Class. **
In this class you will receive basic hands on experience in operating a MSC 13" x 40" Lathe. During this 3 to 4 hour class, David will go over the basics which include work holding, facing, center drilling, drilling, profile turning, grooving and parting operations. You will also learn the basics of using a dial indicator for more accurate parts, power feed, and basic care of the lathe. This is a tool authorization class and once completed you will be authorized to use the lathe and Knox Maker members will receive a key need to operate the lathe. Intro to Machining is a prerequisite class.
(Not covered in the class: Threading, Boring Knurling, Spherical generation, or tapered turning between centers)
There will be a fee of $24.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 1 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Arduino 101 – Chapter 8
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesArduino 101 – Chapters 4 to 8
For those who have finished Arduino 101 and want to continue with the in person classes at Knox Makers, you can sign up for the remaining classes for $14.96 for Knox Makers members and $19.96 for the general public. All of the proceeds from this class, above the cost of the kits, will go to the Knox Makers Electronics area. This class is a bargain, so if you want to also donate to Knox Makers and designate the electronics section for the gift, that would be great. These 4 classes will continue on Mondays from 6:00 pm to 7:30 pm on the following dates (note we skip Halloween):
November 7: Chapter 4
November 14: Chapter 5
November 21: Chapter 6
November 28: Chapter 7
December 5: Chapter 8
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
The cost is $24.96 for Knox Makers members, $44.96 for General Public. There will be a maximum of 8 spots of this class, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Toy Tech Adaptation Night
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesSpark and Knox Makers will be adapting toys for Toy Tech 2022. Toys that are not necessarily functional for children with disabilities will be switch-adapted for use by children of all ability levels. Participants in this workshop can bring their own toy(s) to adapt or adapt toys donated to Spark. Supplies and tools will be provided, but feel free to bring your own! No experience required!
Please RSVP if you plan to attend this event. We would appreciate it very much.
Hand Cut Dovetails
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class you will receive instruction on layout, cutting, and chopping techniques and tools used for constructing hand cut dovetail joinery. The dovetail is the strongest and most utilitarian mechanical corner joint used in woodworking. All tools and materials will be provided for use in this class, however if you have your own dovetail saw, coping/jewelers saw, chisels, scribe or marking knife then feel free to bring your own. By the end of this class you will create one through dovetail joint and one half-blind dovetail joint along with learning some tricks to speed up the process.
This class is limited to 3 students. The cost is $39.96 for Knox Makers members, $69.96 for General Public
New Members Onboarding
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesWhether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
Woodworking 101
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesThis class will cover topics related to safe and correct operation of equipment within the woodworking area, as well as some shop etiquette guidelines. This is the authorization class for the area and is required prior to using the equipment. Safe practices will be demonstrated and learned by a hands on approach in the context of taking rough lumber through the process of milling and operation of all equipment in the space. If you have previously paid and attended a wood authorization class then we encourage you to audit the class free of charge at any time.
The cost is $24.96 for Knox Makers members, $44.96 for General Public. There will be a maximum of 8 spots of this class, and a minimum of 3 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
Laser Cutting Authorization
Knox Makers - Classroom 116 Childress St SW, Knoxville, TN, United StatesThis is an introduction class to our laser cutter, Moonraker. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the design using the laser cutter in our space. This class is intended for members who have not yet been…
Stitch n Bitch
Knox Makers - Fiber Arts 116 Childress St SW, Knoxville, TN, United StatesCome and hang out in Fiber Arts. Just bring a project to work on, hang out and have fun! Directions- Knox Makers parking and entrance is located around the back of the SPARK building in the fenced in area. Knox Makers is a place for the Knoxville area’s engineers, artists, hobbyists, innovators, educators and entrepreneurs…
MIG Welding 101
Knox Makers - Metalworking 116 Childress St SW, Knoxville, TN, United StatesThis is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.…
Intro to Cutting Torch (Cutting Torch 101)
Knox Makers - Blacksmithing 116 Childress St SW, Knoxville, TN, United StatesThis is the Authorization Class to use the oxy-fuel cutting torch.
We will spend some time going over safety and then move on to operation of a cutting torch. We will cut out some basic shapes as well as learn some other tricks you can use a torch for.
Students should wear natural fiber clothing (jeans, cotton shirts, etc) NO polyester, spandex or "tech" style clothes. Socks and shoes are required, NO sandals or open toes.
If you have own PPE- please bring safety glasses, leather gauntlets, shade 5 cutting goggles/glasses, and a welding shirt/jacket. *If you do not have this yourself do not worry! We will have gear for you to use!*
Virtual Board Meeting
Knox Makers - VirtualKnox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
Make a Mallet/Thor Hammer
Knox Makers - Woodworking 116 Childress St SW, Knoxville, TN, United StatesIn this class we each student will, start to finish, make a joinery mallet. A wedged mortise and tenon will be used to fix the head to the handle and made using table saw jigs, advanced layout tools and techniques, hand saws (crosscut back saw), router plane, hand planes, chisels and possibly a few extras. A joinery mallet is an essential addition to any tool chest. If you don't have a tool chest then just look rad about town toting your bespoke Thor hammer. All tools and materials will be provided. No woodworking experience necessary.
The cost is $39.96 for Knox Makers members, $59.96 for General Public