Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
2 events,
Intro to Metalworking (MIG 101)
Intro to Metalworking (MIG 101)
This is the Basic authorization class for using the Metalworking Shop and the MIG Welder. We will cover lots of safety and learn the metal shop tools. Expect an hour or so of hands-on setup and shared MIG welding time (more if needed.)The class may run a bit short or long depending on students' needs.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. Students can bring their own PPE (Personal Protective Equipment,) shield and gloves if they have them. but these are NOT required as we have setups for everyone to use.
Please do NOT bring your own welding machines to use, the setup and testing time could impact other students.
Virtual Board Meeting
Virtual Board Meeting
Knox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public. Directions: This is a virtual event. Check Mattermost for further details…
0 events,
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
1 event,
Woodworking 102 – Woodturning Basics
Woodworking 102 – Woodturning Basics
This is the basic authorization class for using the wood lathes in the wood working zone. In this class Neil will begin by covering the basics of how to operate a wood lathe safely. The rest of the class will focus on turning a spindle which is characterized by turning a piece in which the…
1 event,
New Members Onboarding
New Members Onboarding
Whether you’re a current member, trial member, or prospective member, you’re welcome to join us at this month’s New Member Onboarding!
We’ll start with a brief overview of Knox Makers’ origins and purpose and talk about how the organization works. You’ll learn a bit about the resources available to members and about the path to membership. Afterwards, we’ll hang out and socialize.
The focus is on new members, but longer-term members are encouraged to come and meet new folks.
0 events,
1 event,
Get Some Green: Terrarium Build Class
Get Some Green: Terrarium Build Class
Want to add some greenery to your life but don't have room for a garden? Try making your very own terrarium, a self-contained planter filled with mosses, ferns and other plants that acts like a living, growing art piece.
Terrariums are low maintenance, customizable, and a great way to keep plants indoors without making a mess or taking up too much space.
In this class, participants will learn how to properly construct and maintain a terrarium and add artistic elements, like colored glass, minerals, and even miniature animals and figurines, to create a one-of-a-kind piece.
All containers, rocks, soil, plants and decorations will be provided, though feel free to bring your own decorations if you wish. Casual attire that can get a little dirty is recommended.
NOTE: If you have a container of your own you would like to use, please be sure it is large (over 6" tall), clean, made of clear glass (not frosted or colored), and has a lid or small/constricted opening (the plants in this class need to be in a humid environment).
0 events,
0 events,
1 event,
Open Hack Night – Public Welcome
Open Hack Night – Public Welcome
Open hack nights are a chance for people to come out to Knox Makers and hack on anything at any skill level. You can come out to practice a new programming language, get help working on your personal projects, or try your hand at using the 3d printer. You might just come out to see what other folks are working on and lend a hand. If you know anyone who has been curious to come out to Knox Makers, please invite them along!
Like all other Tuesday nights, this event is free and open to the public. Our night will begin with a Show and Share where attendees are encouraged to bring out the projects they have been working on. This is a great time to request feedback for the future direction of your project, or you can just bring out something you want to show off. We hope to see you there!
0 events,
1 event,
Intro to the Silhouette
Intro to the Silhouette
Using Inkscape's add-on for the Silhouette, you will print and cut your own black and white sticker using registration marks. Start by bringing a raster imagelike JPEG, PNG, GIF, BMP, and TIFF, to walk through the trace commands and create two cut lines at different depths. The first will cut sticker paper, the second cuts all the way through. If time allows, we will explore using other materials like cardstock, vinyl and felt.
Pre-requisites: Find a black and white raster image to use for your sticker. Save on a USB if you plan on using a laptop at the space OR attach and send to sueNsew in Mattermost.
There will be a fee of $9.96 for members.. There will be a maximum of 4 spots of this class, and a minimum of 2 tickets must be sold. If the class minimum is not met 48 hours prior to class start time, the class we be canceled and all tickets will be refunded.
0 events,
2 events,
Intro to TIG Welding (GTAW 201)
Intro to TIG Welding (GTAW 201)
You MUST have completed Introduction to Metalworking (MIG 101) or already be a non-novice welder before taking this class. This is not an intro to the metal shop, but the next step focusing on beginning TIG.
This is the next class in the welding series granting authorization on the TIG Welders and Hand Plasma Cutter.
We will spend just a few minutes refreshing basic safety and area requirements, then we will go over the plasma cutter. We’ll also learn how to set up a TIG machine and have shared welding time practicing technique.
Students are welcome bring their own PPE, shield and gloves if they have them, but this is NOT required- we have setups available to use.
Blacksmithing Authorization – Intro to Forging
Blacksmithing Authorization – Intro to Forging
This class introduces you to the new blacksmithing zone. We cover propane forge operation, zone safety, basic hand forging, and nail making. At the completion of the class, members will receive a key to access the forge and foundry building.
Proper attire is natural fiber clothing such as cotton jeans and T-shirts. Cotton/polyester blend is OK but synthetic clothing or other materials that can melt are unsafe. We have eye protection available but suggest you bring your own if you have them.
This class is for members only and costs $11.96. There will be a 5 person maximum and a 2 person minimum. If the minimum isn’t met 24 hours in advance the class will be canceled.