Calendar of Events
S Sun
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
0 events,
0 events,
1 event,
Introduction to CNC Routing
Introduction to CNC Routing
Introduction to CNC Routing: In this course you will learn how to convert text in Inkscape into code, sending it to the router, and routing the text into wood. Both simple, single stroke text and engraving of text will be covered. At the completion of this course, you will have routed single stroke text of…
0 events,
1 event,
January Board Meeting
January Board Meeting
Knox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public.
0 events,
0 events,
0 events,
0 events,
1 event,
New Member Onboarding
New Member Onboarding
Knox Makers will host a member onboarding session for new members. This night will start with a brief overview of the resources, rules, and goals of Knox Makers. Afterwards, members should feel welcome to stay and socialize. The focus of this evening will be on members who are new to Knox Makers, but older members are encouraged to come help and meet newer members. Snacks will be provided, so please RSVP so that we can make sure we provide an appropriate amount.
0 events,
0 events,
1 event,
Welding 101
Welding 101
Intro to Welding.
This is the Basic startup class for using the MIG Welding in the Metal Area.
We will spend 30 minutes on basic safety and area requirements.
Then expect an hour of hands on setup and shared MIG welding time
I’m going to limit the number of students to 5 , so each person get enough hands on time to be able to feel comfortable using the MIG welder
Students should bring their own shield and gloves, if they have them. But they are not required, as we have setups available to use.
Please do NOT bring your own welding equipment to use, the setup and testing time could impact other students.
0 events,
0 events,
1 event,
DC865: OSINT all the things!
DC865: OSINT all the things!
At this month's meeting, DC865's very own Joe Gray will be teaching us how to be a stalker for hire. We will learn various OSINT techniques for use in threat intelligence, penetration testing, DFIR, and social engineering.
We recommend that you bring a laptop with Kali/Buscador pre-loaded on it.
A list of required API keys, along with a list of required software, will be made available on the DC865 website in advance.
This workshop will run late as we have a lot of material to go over
(estimated at 4 hours). We strongly recommend having your computer prepared ahead of time.
DC865 is a group for hackers, sysadmins, developers, and students to meet, create, and learn. A typically meeting may consist of a
presentation, workshop, or a CTF. Meetings are usually held the third Wednesday of the month, and are free and open to the public. Future
meetings will be announced here on the Knox Makers website, Twitter, and on their website (dc865.org).
1 event,
CNC Routing Intermediate
CNC Routing Intermediate
CNC Routing Intermediate: An intermediate exposure to CNC Routing.including routing of simple images, drilling holes, and changing router bits in the middle of a job. A discussion of alternate materials to wood will be presented. At the completion of this course, you will take home an inkscape image routed onto a board (time permitting) or…
0 events,
2 events,
Laser Cutter 101
Laser Cutter 101
This is an introduction class to our laser cutter, Goldfinger. Jondale will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the desing using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Goldfinger or need/want a review of its operation.
Laser Cutter 101
Laser Cutter 101
This is an introduction class to our laser cutter, Goldfinger. Tracy will lead attendees of this class as they learn the basics of laser cutting, make a simple design, and then engrave and cut out the desing using the laser cutter in our space. This class is intended for members who have not yet been authorized to use Goldfinger or need/want a review of its operation.
1 event,
Space Day – Codes Cleanup
Space Day – Codes Cleanup
This month for space day, we're dedicating the day to working on some electrical codes issues. We will be moving light fixtures and doing minor updates to bring us into compliance. This is a great chance to make your mark on the space, be part of the community and a fantastic way for a new…
0 events,
1 event,
Lightning Talks – Open Hack Night – Public Welcome
Lightning Talks – Open Hack Night – Public Welcome
Lightning Talks are an expanded form of Show and Share, where attendees are encouraged to bring out the projects they have been working on. Instead of the 3-minute Show and Share presentation, Lightning Presenters will have 15-minutes to show off their projects. This opens up room to get more in-depth with your topic than is normally…
0 events,
1 event,
Machining 100 – Intro To Machining
Machining 100 – Intro To Machining
Billy will give you a basic introduction to the machining area. This class will begin with a tour of the machining area with a, in-depth discussion of each tool, it’s uses, proper procedures, and safety. At the end of this class, all participating members will be authorized to use the drill press, box pan brake, handtools, and the horizontal bandsaw. **This is a prerequisite for the Bridgeport Mill and Lathe tool authorization classes**
0 events,
1 event,
Milling 101 – Bridgeport Mill Tool Authorization
Milling 101 – Bridgeport Mill Tool Authorization
** Intro to Machining is a prerequisite class. You have to complete the Intro to Machining class before you can take the Milling 101 Class. *****
In this class you will receive basic hands on experience in operating a Bridgeport Series I J-Head milling machine. During this 3 to 4 hour class, Billy will go over the basics of tramming the head of the mill, tramming the vise, edge finding, work holding and setup, drilling , side milling, and top/end milling operations. You will also learn the basics of the DRO (digital read out), the table power feed, and basic care of the mill. This is a tool authorization class and once completed you will be authorized to use the milling machine and Knox Maker members will receive a key need to operate the mill. Intro to Machining is a prerequisite class.
0 events,
0 events,
1 event,
Annual Members Meeting
Annual Members Meeting
This week we will be having our annual members meeting. We will go over the state of the organization, what we have accomplished in the past year, and what our plans moving forward in 2019 are. We will also vote on board members and bylaw changes. This event is for current, paying Knox Makers members…
1 event,
Wood Shop 101: An introduction to the Woodworking Zone
Wood Shop 101: An introduction to the Woodworking Zone
Fred will teach you about safety, basic use and unique features of the power tools in the woodworking area. At the completion of this course, you will be authorized to use the equipment without supervision. Details on how to use the equipment on specific projects will be covered in later courses.
There will be a fee for this class of $9.96 for current Knox Makers members. There will be a maximum of 10 spots for this class, and a minimum of 5 tickets must be sold. If the class minimum is not met 24 hours prior to class start time, the class will be canceled and all tickets will be refunded.
0 events,
0 events,
1 event,
February Board Meeting
February Board Meeting
Knox Makers members are welcome to join us as we hold our monthly board meeting. The board will be discussing pertinent topics happening around the space. All current, paying Knox Makers members are welcome to attend. This event is closed to the general public.